Typical Application for repair and rebuilding:

Cracked or burst pipes; fuel tanks; pumps; gear box housings; bell housing; water tanks; engineblocks; condensors, plastic moulds; carburettors, foundry patterns; filling blow holes in castings; valves; radiators; sumps; worn shafts.

Long shelf life, high temperature resistant + 200 °C, max. + 280 °C; easy mixing ratio (1:1); free of solvents.

Cure time (at 20 °C).: handling strength within 2 hours; final hardness after 6-8 hours. Compressive strength: abt. 100 N/mm²

Base

Hardener

Set (case)

cons. of:

Base

Hardener

FE Rapid

Cleaner

1406

1404

Measuring sp.

Spatula

Bandage

500 g

500 g

500 g

500 g

400 g

400 ml

24 ml

50 ml

1 Pc.

2 Pcs.

1 Pc.

1000

For repairs of cracked or burst pipes, fuel tanks, pumps, gear box housings, bell housing, water tanks, engineblocks, condensors, plastic moulds etc.

Base

Hardener

250 g

150 g

1408

1409

1410

1411

Will harden within minutes! Quick and easy to use. Hand kneadable. For repairing, rebuilding and restoring. Can be drilled, tapped, filed, sanded, painted or machined. Use for filling of holes in castings, repairing of plumbing leaks, sealing of leaks in pipes, elbows, joints, sleeves, traps and drain, tanks, etc.

Curing time: 10 - 15 min.

Types of Repair Sticks available:

Aqua (white) A must for marine applications. Use for repairs on damp, wet areas and under-water applications (boats, water tanks, spas, hot tubes, pools, etc.) Excellent adhesion to PVC.

Copper Ideal where a colour on copper, brass, bronze or other non-ferrous metals is needed.

Steel For repairs of steel and iron castings.

Aluminium For repairs on aluminium boats, aluminium castings, tanks, refrigerators, recreation vehicles.

 Copper

 Steel

 Aluminium

115 g

115 g

115 g

12

12

12

1409 115

1410 115

1411 115

500 g

1 kg

2 kg

1403

Fast setting (10 - 50 seconds), high strength (up to 190 kg/cm², 2200 psi), economical (1 x 50 gr. bottle gives about 3000 one drop application.

Types of Chembond available:

1402: Low viscosity type (thin liquid - 100 cps.) Ideal for close fit work

1403: High viscosity (2000 - 2400 cps.) Used for poor fit up work and for porous materials, acts as  a gap filler.

High viscosity

20 g

50 g

 20 g

50 g

1402 020

1402 050

1403 020

1403 050

1405

Application: locking of nuts screws, bolts, studs. Retains slip fit or press fit parts such as bearings, pullegs, gears, keys etc.

Types of Chemlock available:

1404:  Medium strength

1405:  High strength

High str.

50 g

1405 050

Extremely strong, tough, and semi-flexible epoxy adhesive. It has outstanding adhesion to iron, steel, aluminium, bronze, brass, wood, ceramic. Chem-Weld 1406 comes in a new and unique package. 2 materials, part A and B, are packaged seperately but still combined in one 2 in 1 dispenser. Easy to use - just snip off the end of the double tube. Push the double piston rod and the proper of A and B will be squeezed out automatically.

Physical characteristics:

On steel sheet C75 sandblasted (tested at 23°C)

Adhesive strength:

Pot life of mixture 1,6 mm: 5 - 10 min.

Shelf life: 12 months (room temperature)

Special adhesive tape for bonding of metals and other materials. Doubled sided. Replaces time-consuming drilling, welding or screwing. Ideal for joining of thin and dissimilar materials such as aluminium, stainless steel, copper etc.  Use for joining of sheet metals, signs, in car manufacturing etc.

Bonding strength on steel:

(N/625mm²): 20°C: 40 N

Shear strength on steel: 

(N/25mm²):   20°C: approx. 16 N

Thickness:: 1,5 mm +/- 0,3 mm

Temperature range: -40°C to +80°C

12 mm

25 mm

25 mm

50 mm

50 m

50 m

5 m

50 m

118 012

118 025

118 005

118 050